About IDVISIONME

This author has not written his bio yet.
But we are proud to say that IDVISIONME contributed 404 entries already.

Entries by IDVISIONME

Pyramid Series Proximity Readers

Pyramid Series Proximity is recognized as an electronic-security benchmark for 125-kHz proximity readers and credentials. Based upon proven contactless digital radio frequency identification (RFID) technology, Pyramid Series products assure support with the widest range of standard electronic access control systems. Further, the line offers unique Farpointe-only features, such as MAXSecure™ and fleaPower™. Proximity Readers P-300 […]

ProxPro Keypad 5355

Overview :

The ProxPro® proximity card reader’s weatherproof design and architecturally attractive enclosure allows easy mounting indoors or out. The ProxPro Reader is ideal for applications requiring a larger read range.

Ideal for medium-range applications.
Available with Wiegand, Serial (RS-232/RS-422) or Clock-and-Data interface.
Sealed for indoor or outdoor use.
Optional glass mount kit available for mounting the reader behind glass.
Available in gray or beige.
Keypad data and card data can be sent on the same cable, or on a separate cable using 2 of 7 or 3 x 4 matrix.

Key Features

Affords high reliability, consistent read range characteristics, and low power consumption in a single, easy-to-install package.
Features multicolor LED, internal or host control of the LED, and/or beeper and a beeper “off” switch for silent operation.
Provides Wiegand protocol interface compatibility with all standard access control systems.
Offers an optional, fully integrated personal identification number keypad for heightened security. Can be mounted to glass (using the optional glass mounting kit).

Typical maximum* read range
ProxCard® II Card – up to 8″ (20 cm)
ISOProx® II Card – up to 7″ (17.5 cm)
DuoProx® II Card – up to 7″ (17.5 cm)
Smart ISOProx® II Card – up to 7″ (17.5 cm)
Smart DuoProx® II Card – up to 7″ (17.5 cm)
HID Proximity & MIFARE® card – up to 7″ (17.5 cm)
ProxCard® Plus Card – up to 3″ (7.5 cm)
ProxKey® II Keyfob – up to 3″ (7.5 cm)
MicroProx® Tag – up to 4″ (10.2 cm)
ProxPass® Active Vehicle Tag – N/A

*Depending on local installation conditions.

Dimensions
5.0″ x 5.0″ x 1.0″ (12.7 x 12.7 x 2.54 cm)

Power Supply
10-28.5 VDC; Linear power supplies recommended. Reverse voltage protection included.

Current Requirements
Average: 100 mA (12 VDC)
Peak: 120 mA (24 VDC)

Operating Temperature
-22º to 150º F (-30º to 65º C)

Operating Humidity
0-95% relative humidity non-condensing

Weight
12 oz. (336 gm)

Cable Distance
Wiegand or Clock and Data interface: 500 feet (152 m)
RS-232 interface: 50 feet (15 m)
RS-422 interface: 4000 feet (1219 m)
Recommended cable is ALPHA 1295 (22 AWG) 5 conductor stranded with overall shield or equivalent.
Additional conductors may be required for LED or beeper control. RS-422 requires ALPHA 6212C 2-Twisted Pair, shielded cable with drain wire, or equivalent for data, plus ALPHA 1292C two-conductor shielded or equivalent for DC power.

Certifications
Canada/UL 294 Listed: Access Control System Units
FCC Certification, United States
Canada Certification
CE Mark, Fifteen EU Countries under the R&TTE
Directive (EN60950 – ITE Electrical Safety, EN 300 330 – SRD, and ETS 300 683 – EMC)
IEC60950, ITE CB Scheme Electrical Safety
Australia C-Tick Mark, New Zealand EMC, China
Taiwan (5355 only)

ThinLine II 5395

Overview:

Providing performance and reliability, HID’s attractive, unobtrusive ThinLine II® proximity card reader is housed in a two-piece, weatherproof secure potted enclosure.

The size of most standard U.S. switch plates.
Available with Wiegand or Clock-and-Data interface.
Potted reader suitable for indoor or outdoor use.
Base part numbers: 5395 (Wiegand), 5398 (Clock-and-Data).
18″ (45 cm) wire pigtail standard; consult factory for 9′ (2.7 m) pigtail available by special order.

Key Features

Easily installed and maintained with the use of replaceable covers.
Available with a Wiegand or Clock-and-Data interface.
Provides high reliability, consistent read range and low power consumption.
Features include multicolor LED and internal control or host control of the LED and beeper.
Mounts directly on metal with minimal impact on the read range performance.
Aesthetic design available in two cover designs and four colors to match any décor.
Includes multilingual installation manual.

Typical maximum* read range
ProxCard® II Card – up to 5.5″ (14 cm)
ISOProx® II Card – up to 5″ (12.7 cm)
DuoProx® II Card – up to 5″ (12.7 cm)
Smart ISO/DuoProx™ Cards – up to 5″ (12.7 cm)
Proximity & MIFARE™ Card – up to 5″ (12.7 cm)
ProxCard® Plus Card – up to 1.5″ (3.8 cm)
ProxKey® II Keyfob – up to 2″ (5.1 cm)
Microprox® Tag – up to 3″ (7.6 cm)

*Depending on local installation conditions.

Dimensions
4.70″ x 3.00″ x 0.68″ (11.9 x 7.6 x 1.7 cm)

Power Supply
5-16 VDC
Linear power supplies are recommended.

Current Requirements
Average: 30 mA (5 VDC); 20 mA (12 VDC)
Peak: 110 mA (5 VDC); 115 mA (12 VDC)

Operating Temperature
-22º to 150º F (-30º to 65º C)

Operating Humidity
0-95% relative humidity non-condensing

Weight
3.3 oz. (94 gm)

Cable Distance
Wiegand interface: 500 feet (150 m)
Clock-and-data interface: 50 feet (15 m)
Recommended cable is ALPHA 1295 (22 AWG) 5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control.

Certifications
Canada/UL 294 Listed
FCC Certification, United States
Canada Certification
EU and CB Scheme Electrical Safety (EN60950 and IEC60950 ITE Electrical Safety)
Fifteen EU Countries under the R&TTE Directive (EN300 330 – SRD, and ETS 300 683 – EMC)
CE Mark
Australia C-Tick, New Zealand
Taiwan, China

MaxiProx 5375

Overview & Key Features :

HID’s MaxiProx® Reader is ideal for installations incorporating parking control and long read range applications. The MaxiProx reader packages all the electronics in one rugged, attractive and easy-to-install housing.

Long read range distance (up to 6′ with ProxPass).
Autotune allows read range to be maintained within four inches of metal.
Wiegand, Clock-and-Data, RS-232, RS-422, and RS-485 output modes are configurable.
“Parking hold” feature ensures accurate detection of vehicles in parking lanes.
Power requirements: 12 or 24 VDC (configurable) .
Current requirements: 200mA avg / 700 mA peak at 12VDC; 260mA avg / 1.2A peak at 24 VDC.
Dimensions: 12.0″ x 12.0″ x 1.0″ (30.5 x 30.5 x 2.54 cm).

Key Features:

Long read range distance (up to 6′ with ProxPass).
Autotune allows read range to be maintained within four inches of metal.
Wiegand, Clock-and-Data and selectable serial outputs available.
“Parking hold” feature allows connection to a loop detector to ensure accurate detection of vehicles in parking lanes.
Compatible with all HID cards and tags with formats up to 85 bits.
Multicolor LED with internal or host control of the LED and beeper.
Two MaxiProx units can operate one meter apart for “HI-LO” (truck and car) installations.
Reader supervision signal for CASI-RUSCO panels.

Typical Maximum Read Range*
ProxCard II Card – up to 24″ (60.9 cm)
ISOProx II Card – up to 20″ (50.8 cm)
DuoProx II Card – up to 20″ (50.8 cm)
Smart ISOProx II – up to 20″ (50.8 cm)
Smart DuoProx II Card – up to 20″ (50.8 cm)
HID Proximity MIFARE Card – up to 20″ (50.8 cm)
ProxCard®Plus Card – up to 13″ (33 cm)
ProxKey II Keyfob – up to 17″ (43.2 cm)
Microprox Tag – up to 15″ (38 cm)
ProxPass Active Vehicle Tag – up to 6′ (1.8 m)

*Depending on local installation conditions.

Dimensions
11.8″ x 11.8″ x 1.0″ (30.0 x 30.0 x 2.54 cm)

Cable distance
Wiegand interface: 500 feet (152 m)
Clock-and-data interface: 50 feet (15 m)
RS-232: 50-200 feet (15-61 m)
Recommended cable is ALPHA 1295 (22 AWG) 5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control.
RS-422 and RS-485: 4000 feet (1219 m)
Recommended cable is ALPHA 1297.

Power supply
Configurable 12 or 24 VDC
Linear power supplies are recommended.

Current requirements
DC Current at 12V: Avg. 200mA, Peak 700mA
DC Current at 24V: Avg. 260mA, Peak 1.2A

Operating temperature
-22º to 150º F (-30º to 65º C)

Operating humidity
0-95% relative humidity non-condensing

Weight
51 oz. (1.4 kgm)

Certifications
Canada/UL 294 Listed: Access Control System Units
FCC Certification, United States
Canada Certification
CE Mark, Fifteen EU Countries under the R&TTE
Directive (EN60950 – ITE Electrical Safety, EN 300 330 – SRD, and ETS 300 683 – EMC)
IEC60950, ITE CB Scheme Electrical Safety
Australia C-Tick Mark
New Zealand EMC

ProxPro II 5455

Overview :

HID’s ProxPro® II proximity reader for access control combines performance, reliability, and ease of installation into a two-piece, weatherproof potted enclosure. International users will appreciate the multilingual installation manual, lower voltage requirement and flexible mounting options.

Ideal for medium-range applications.
Available with Wiegand or Clock-and-Data interface.
Optional glass mount kit available for mounting the reader behind glass.
Potted reader suitable for indoor or outdoor use.
Available in black, white, gray or beige.
18″ (45 cm) wire pigtail standard; consult factory for 9′ (2.7 m) pigtail available by special order.

Key Features

Two-piece reader design allows for easy installation.
Available with a Wiegand or Clock-and-Data interface.
Provides high reliability, consistent read range and low power consumption.
Features include multicolor LED and internal control or host control of the LED and beeper.
Mounts directly on metal with minimal impact on the read range performance. Optional kit enables mounting behind glass.
Compare features of the ProxPro II to the original ProxPro reader

Typical Maximum Read Range
ProxCard® II Card – up to 9″ (22 cm)
ISOProx® II Card – up to 8″ (20 cm)
DuoProx® II Card – up to 8″ (20 cm)
Smart ISOProx® Card – up to 8″ (20 cm)
Smart DuoProx® Card – up to 8″ (20 cm)
HID Proximity and MIFARE® card – up to 8″ (20 cm)
ProxCard® Plus Card – up to 4″ (10 cm)
ProxKey® II Keyfob – up to 4″ (10 cm)
MicroProx® Tag – up to 4″ (11 cm)

*Depending on local installation conditions.

Dimensions
5.00″ x 5.00″ x 1.00″ (12.7 x 12.7 x 2.54 cm)

Power supply
5-16 VDC
Linear power supplies are recommended.

Cable Distance
Wiegand interface: 500 feet (150 m)
Clock-and-Data interface: 50 feet (15 m)
Recommended cable is ALPHA 1295 (22 AWG) 5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control.

Current Requirements
Average: 25 mA at 12 VDC
Peak: 125 mA at 12 VDC

Operating Temperature
-22º to 150º F (-30º to 65º C)

Operating Humidity
0-95% relative humidity non-condensing

Weight
13.6 oz. (385 g)

Certifications
Canada/UL 294 Listed
FCC Certification, United States
Canada Certification
CE Mark
EU and CB Scheme Electrical Safety (EN60950 and IEC60950 ITE Electrical Safety)
Fifteen EU Countries under the R&TTE Directive (EN300 330 – SRD, and ETS 300 683 – EMC)
Australia C-Tick (pending)
New Zealand (pending)
Taiwan (pending)

EntryProx 4045

Overview:

HID’s EntryProx™ stand-alone reader truly stands alone in what it delivers. Compatible with all HID proximity cards and keytags, EntryProx™ provides single-door proximity access control and is ideal for unique applications. The reader, designed to be weatherand vandal-resistant, can be mounted indoors or outdoors up to 10 feet away from the control unit using the detachable antenna module. The versatile, attractive unit is easily modified to become an on-line reader by switching to Wiegand output mode, allowing it to connect to any OEM controller and provide card and PIN output.

The ADA-compliant 12-position keypad features large white-on-black numbers, enabling PIN entry or programming, with optional audio feedback and a raised dot on the 5 key. For extra security, EntryProx’s keypad incorporates the “invalid PIN” lockout feature, preventing unauthorized trial-and-error PIN code entry.

The reader also features faster programming, enabling end-users to batch load up to 2,000 HID cards or keytags, in any format up to 37 bits, by entering a single keypad command sequence. A Block Delete feature allows for efficient badge administration by deleting a sequential range of cards/keytags from the EntryProx by user location.

Key Features

Ideal for Unique Applications – Proximity access control for small installations or remote locations.
Trouble-Free Keypad Input – Extra secure keypad enables PIN entry or programming.
Remote Monitoring – Configurable to be used in conjunction with an on-line system.
Faster Programming – Batch load up to 2,000 HID cards or keytags with a single keypad command sequence.
Efficient Badge Administration – Block Delete allows deletion of cards/keytags by user location.

Typical maximum* read range
ProxCard® II card up to 3.0″ (7.6 cm)
ISOProx® II card up to 2.5″ (6.35 cm)
DuoProx® II card up to 2.5″ (6.35 cm)
Smart ISOProx® II up to 2.5″ (6.35 cm)
Smart DuoProx® II up to 2.5″ (6.35 cm)
HID Proximity & MIFARE® Card up to 2.5″ (6.35 cm)
ProxCard® Plus card up to 1.0″ (2.5 cm)
ProxKey™ II Keyfob up to 1.5″ (3.8 cm)
Microprox® Tag up to 2.0 ” (5.1 cm)

*Depending on local installation conditions.

Dimensions
5.25″ x 2.75″ x 1.625″ (13.33 x 6.98 x 4.1 cm)

Power Supply/ Current Requirements
10 – 15 VDC, reverse voltage protected
Linear supply recommended, 150 mA @ 12 VDC

Relay Outputs
Strike Relay – Form C, switches up to 1A @ 30 VDC
Aux Relay – Form C, switches up to 1A @ 30 VDC

Monitor Inputs
Door Position – N.O. dry contact
Request to Exit – N.O. dry contact

Sounder
4000Hz, defeatable

LEDs
Bi-Color (Red/Green), Amber, Infrared (use with optional palmtop printer)

Operating Temperature
-31º to 150ºF (-35º to 66ºC)

Operating Humidity
5% to 95% relative humidity non-condensing

Cable Distance
Remote Reader Module – 10 feet (3m)
Wiegand Interface – 500 feet (152m)
Recommended cable is ALPHA 1295C (22AWG) 5-conductor stranded with overall shield or equivalent

Operation
Strike Time: 1 – 99 seconds (Adjustable)
Strike Mode: Access Timer or Toggle/Latch
Door Ajar Time: 10 – 990 Seconds (Adjustable)

Card Programming
26-bit format – batch enrollment
OEM proprietary format – present card to enroll

Facility Code Processing Options (26-bit only)
Check Facility Code and Card ID
Check Facility Code only (accept any ID#)

Certifications
UL 294
FCC Certification, United States
Canada Certification
CE Mark, Europe
GS Mark by TÜV Rheinland
Australia C-Tick Mark
New Zealand
Korea

ProxPoint Plus 6005

ProxPoint Plus | 6005

Overview & Key Features :

HID’s ProxPoint® Plus reader combines multiple configuration options with an attractive, inconspicuous design and economical price. Its secure potted electronics are ideal for both indoor and outdoor applications.

Small sized, low cost reader features a beeper and multicolor LED which can be host and/or locally controlled.
Potted reader suitable for indoor or outdoor use.
18″ (45 cm) wire pigtail standard; consult factory for 9′ (2.7 m) pigtail available by special order.
Classic Series covers available in black, gray, white or beige. Designer Series covers available in black or gray.

Key Features :

Features a beeper and multicolor LED which can be hostand/ or locally controlled.
Enables various beeper and LED configurations, depending on individual site requirements.
Can read HID cards with formats up to 85 bits.
Designed for mounting directly onto metal with no change in read range performance.
Available with either Wiegand or Clock-and-Data (magnetic stripe data) output.
Compatible with all standard access control systems.
Aesthetic design available in two cover designs and in four colors to match any decor.
Includes multilingual installation manual.

Typical maximum* read range
ProxCard® II Card – up to 3″ (7.6 cm)
ISOProx® II card – up to 2.5″ (6.35 cm)
DuoProx® II Card – up to 2.5″ (6.35 cm)
Smart ISOProx®/DuoProx® II Cards – up to 2.5″ (6.35 cm)
Proximity & MIFARE® Card – up to 2.5″ (6.35 cm)
ProxCard Plus® Card – up to 1.0″ (2.5 cm)
ProxKey® II Keyfob – up to 1.5″ (3.8 cm)
MicroProx® Tag – up to 2″ (5.1 cm)

*Depending on local installation conditions.

Dimensions
3.135″ x 1.720″ x 0.660″ (7.96 x 4.37 x 1.68 cm)

Power Supply
5-16 VDC
Linear power supplies are recommended.

Maximum Current Requirements
Current (DC)
Average 30 mA, Peak 75 mA

Operating Temperature
-22º to 150º F (-30º to 65º C)

Operating Humidity
0-95% relative humidity noncondensing

Weight
2.7 oz. (75 gm)

Current Requirements
20mA avg / 75mA peak at 12VDC

Cable Distance
Wiegand or Clock-and-Data interface:
500 feet (150 m)
Recommended cable is ALPHA 1295 (22 AWG) 5 conductor stranded with overall shield or equivalent.

Certifications
Canada/UL 294 Listed
FCC Certification, United States
Canada Certification
EU and CB Scheme Electrical Safety (EN60950 and IEC60950 ITE Electrical Safety)
Fifteen EU Countries under the R&TTE Directive (EN 300 330 – SRD, and ETS 300 683 – EMC)
CE Mark
Australia C-Tick, New Zealand
Taiwan, China

ACR89U-A1 Handheld Smart Card Reader

Outdoor MorphoAccess 500

Outdoor MorphoAccess® (OMA) 500 Series is a range of high-performance fingerprint identification terminals that can be installed outdoors:

weatherproof and IP65 rated
rapid, accurate and reliable
using a FBI PIV IQS certified sensor with large capture surface
allowing multifactor authentication and 1:N identification of up to 50,000 users
easily integrable into existing systems
equipped with Power over Ethernet (PoE)
MIFARE®/DESFire® smartcard reader/encoder in option
Fake Finger Detection in option

	OMA 520 D	OMA 521 D
Fake Finger Detection	No	Yes
Contactless Reader/Encoder	MIFARE®/DESFire®	MIFARE®/DESFire®
Database Size	3000 or 50,000 users with MA-Xtended license	3000 or 50,000 users with MA-Xtended license
Multifactor Authentication	BIO, Card, Card+BIO, PIN+BIO, Card+PIN, Card+PIN+BIO, Card+PIN+BIOPIN (*)	BIO, Card, Card+BIO, PIN+BIO, Card+PIN, Card+PIN+BIO, Card+PIN+BIOPIN (*)

(*) BIOPIN = alternate password solution instead of fingerprints

Buy outdoor Access control system in Dubai from ID Vision UAE. MorphoAccess is weatherproof, rapid, accurate and reliable.

Bioscrypt 4G V-Flex WR

Not every solution requires extreme weather performance. When you need a compact device for use in moderate outdoor climates with powerful biometric capabilities, the Bioscrypt 4G V-Flex WR™ is the right solution for you. The Weather Resistant (WR) models have specialized components and a built in hood that offers protection against certain outdoor elements.

Features at a Glance