About IDVISIONME

This author has not written his bio yet.
But we are proud to say that IDVISIONME contributed 404 entries already.

Entries by IDVISIONME

HID VertX EVO V2000 Reader Interface/Networked Controller

VertX EVO™ V2000 is a two-reader access control panel that enables interface with two doors (single reader) or one door (in/out reading).

The EVO V2000 handles all online door decisions, door input monitoring and output control and reader interface for up to two doors. The solution has two inputs per door for door monitor and REX, and two outputs per door for lock and AUX.

VertX EVO V2000 also includes three inputs for AC power fail, Battery power fail and Tamper, and is powered by a local power supply (12 or 24 VDC).

Features

Provides a complete and fully functional hardware/firmware infrastructure for access control software host systems.
Enables the replacement of head end software without visiting the access control panel, reducing change out costs.
Stores a complete access control and configuration database for up to 2 Reader Interfaces (up to 2 doors) and 250,000 cardholders.
Connects to the host and other devices on a TCP/IP network.
Receives and processes real-time commands from the host software application.
Reports all activity to the host; reports supervised inputs /alarms with 255 priorities.
Provides fully functional offline operation when not actively communicating with the host access control software application, performing all access decisions and event logging.
Interface for two Wiegand or Clock-and-Data readers; inputs for 2 door monitors, 2 REX switches, AC fail, Battery fail and Tamper.
Non-latching relay outputs rated 2 A @ 30 VDC
- 2 door strikes (configurable)
- 2 auxiliary devices (door held/forced alarm, alarm shunt, host offline (communication down),or general purpose)

HID VertX EVO V1000 Networked Controller

Overview :

The HID VertX EVO V1000 is a multi-door access control panel with a networked access controller. It relieves the strain on corporate LANs by linking up to 32 door controllers with a single IP address.

The high performance platform increases door uptime while the master controller minimizes corporate LAN overhead by providing access control decisions for up to 64 readers.The VertX EVO V1000 is a networked access controller with a multi-door access control panel.

VertX EVO V1000 makes all online door decisions, input monitoring and output control for all connected interface modules, including VertX® V100 (door interface), V200 (input monitor) and V300 (output control).

The V1000 is fueled by a local power supply and features two on-board inputs and outputs for local input point monitoring and auxiliary output control (12 or 24 VDC).

Features :

Provides a complete and fully functional hardware/firmware infrastructure for access control software host systems.
Enables the replacement of head end software without visiting the access control panel, reducing change out costs.
Stores a complete access control and configuration database for up to 32 Reader Interfaces (up to 64 doors) and 250,000 cardholders.
Connects to the host and other devices on a TCP/IP network.
Receives and processes real-time commands from the host software application.
Reports all activity to the host; reports supervised inputs/alarms with 255 priorities.
Provides fully functional offline operation when not actively communicating with the host access control software application, performing all access decisions and event logging.
Access control system interfaces with combinations of devices with a maximum of 32.
Devices are:
- VertX V100 – Door/Reader interface (up to 2 doors/1 reader or 1 door/2 readers)
- VertX V200 – Input monitor interface (up to 16 monitor points per device)
- VertX V300 – Output control interface (up to 12 control relays per device)

Specifications :

Model (and Part #): EVO V1000 (71000BEP0N01A)

Mounting: Mount to any wall surface, using four screws. For UL compliance, one or more gateways can be mounted inside a locking customer supplied NEMA-4 rated enclosure

Dimensions: 5.8″ W x 4.825″ H x 1.275″ D (147.32 mm x 122.55 mm x 32.38 mm)

Weight: 12.4 oz (.35 kg)

Operating Temperature: 32° to 122° F (0° to 50° C)

Operating Humidity: 5% to 95% relative, non-condensing

Communication Ports: Ethernet (10/100), RS485 (half duplex)

Warranty: Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).

Operating Current (MAX) @ 12-24VDC: 210mA

Operating Current (AVG) @ 12VDC: 625mA (with 2 iCLASS Readers)

Supervised Inputs Power (MAX): 0.025W (5mA sink, 5V nominal) 0 to +5VCD Ref

Relay Contact Rating (Dry Output): 2A @ 30VDC (MAX Amperage that is UL Certified) 5A @ 30VDC

Buy genuine VertX EVO 1000 networked controllers in Dubai, from ID Vision Dubai. We are one of the top supplier of complete range of HID access controls.

HID EDGE EVO EHRP40-K Controller/Reader and Module

Overview :

The EDGE EVO® EHRP40-K Controller/Reader and Interface Module package is a single-door access control panel with reader and separate discrete door interface that enables cost effective installation and high performance access control functionality. The controller/reader is installed at the door and the Hi-O Interface Module is mounted separately in a secure location.

Additional highlights

The controller/reader and module are connected using the secure Hi-O bus and the Hi-O module provides interface to four discrete inputs and two outputs.
The included Hi-O interface module provides interface to a second optional reader used for in/out reading.

The integrated EDGE EVO® EHRP40-K Controller/Reader provides 13.56 MHz iCLASS smart card compatibility and controller logic in one device.

Specifications:

Model (and Part #): EHRP40-K (82125CKI0001A)

Mounting Holes: US Single-gang and EU / APAC 60mm

Dimensions – EHRP40: 3.3″ W x 4.8″ H x 1.2″ D(83.9 mm x 122.2 mm x 30.5 mm)

Dimensions – EDWM-M: 3.3″ W x 5.0″ H x 1.5″ D (84.0 mm x 127.0 mm x 37.0 mm)

Weight – EHRP40: 6.3oz (180g)

Weight – EDWM-M: 5.6oz (160g)

Operating Temperature: 32° to 122° F (0° to 50° C)

Operating Humidity: 5% to 95% relative, non-condensing

Communication Ports: Ethernet (10/100), Hi-O CANbus, Wiegand or Clock-and-Data

13.56 MHz Card Compatibility: 13.56 MHz iCLASS HID Application, ISO14443A CSN

125 kHz Card Compatibility: HID Prox, Indala, AWID, EM4102 (Simultaneous Support)

Warranty: Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).

DC Input (MAX) @ PoE: 14.4W (300mA @ 48VDC)

DC Input (MAX) @ AUX +12VDC:18W (1500mA @ 12VDC)

DC Input (MAX) @ AUX +24VDC: 36W (1500mA @ 24VDC)

Supervised Inputs Power (MAX) : 0.025W (5mA sink, 5V nominal) 0 to +5VCD Ref

DC Input @ PoE: 7.7W

DC Input @ AUX +12VDC:12.8W

DC Input @ AUX +24VDC: 26.3W

Hi-O CANbus Output Voltage, DC Input = PoE: 24VDC

Hi-O CANbus Output Voltage, DC Input = AUX: AUX +VDC

Invixium Titan

Futuristic. Technological. Colossal. At Invixium, we are inspired to create something unique, of exceptional quality, from the rarest, most exquisite and robust materials; to go far beyond what was considered possible. Our story is one of relentless reinvention and commitment to bring you the extraordinary. TITAN blends an unmistakable design, cutting-edge technology with uncompromising performance, […]

iCAM T10

R100 SERIES

HID OMNIKEY 5025 CL

Overview :

Designed for ease-of-use, the OMNIKEY® 5025CL reader works with existing low frequency physical access control cards such as HID Prox®, enabling smooth implementation of logical access applications using ID cards.

The 5025CL reader ensures greater stability, durability and compliance and can be used as a replacement to the existing OMNIKEY 5325 CL family*. The solution provides full CCID support and allows the usage in PC, as well as thin- and zero-client environments. The reader’s pocket size and modern, stylish color options allow for seamless integration into different corporate environments, including offices and production floor areas. Key features

Supports 125 kHz proximity technology
Small form factor design.
Native CCID implementation supporting PC, thin and zero clients
5325 CL backward compatibility.
Reads unique number from HID Prox® cards.
Smart accessories – adhesive plate, screw mount and card holder.
Tap-and-go use as well as permanent “card present” mode.
Supports WINDOWS®, LINUX ® and MAC® operating systems.

* Driver update required

Specifications :

Host Interface
USB 2.0 full speed, Type A Connector

Contactless Smart Card Interface
HID Prox® 125 kHz

Driver
CCID and PC/SC Driver support

Housing
OMNIKEY® Small Footprint Design
Body Light Grey, cover in anthracite

Dimensions
2.32″ x 2.32″ x 0.45″ (59 mm x 59 mm x 11.4 mm)

HID OMNIKEY 3021 USB

Overview:

HID Global, with its product brand OMNIKEY one of the world’s leading manufacturers of innovative smart card readers, offerswith the OMNIKEY® 3021 USB a high-performance smart card reader in a small form factor for desktop as well as mobile usage. The OMNIKEY® 3021 is an easy-to-install USB device suited for all contact smart card operations like online-banking or digital signature applications.

Key Features

Elegant design
Small form factor fit for letter shop
All major operating systems supported
High speed data transmission

HID OMNIKEY 5422

Overview :

The OMNIKEY® 5422 represents the ultimate combination of contact and contactless technology in a single device. The solution features a dual interface, PC-linked reader that reads / writes to both a 13.56 MHz contactless smart card and virtually any contact smart card to support environments where both contact and contactless smart card technologies are required.

The reader provides users with the convenience, speed and security for applications such as user authentication to PCs, software, cloud-based applications, networks and web sites.

The OK5422 eliminates the requirement for driver installation and is suitable to be used with standard PC or workstations, as well as with thin and zero clients.

Benefits:

Versatile – Ideal for end-user environments using both contact and contactless smart card technology and migration scenarios
Leverages existing employee badge – Expands the usage of existing physical access cards to computer logon, as well as network and cloud applications.
Easy to install – Eliminates the need to install drivers; uses native supported CCID drivers within the operating system.
Increased security and improved user experience – Read and retrieve highly secure one-time passwords (OTP) from Seos® card.

Specifications :

Card Interface

Contact ID-1
Contactless 13.56 MHz

Credential Support

ISO 7816 Contact Cards
ISO 14443 A/B Contactless Cards
CRESCENDO
HID iCLASS® / MIFARE® Classic / Ultralight /DESFire EV1

Solution compatibility

ActivID® ActivClient
ActivID® Applets

Optional Accessories

Mounting accessories kit
Card Holder for Card Presence operation
Standing Base

HID OMNIKEY 6121 Mobile USB

Overview :

HID Global’s OMNIKEY® product brand, one of the world’s leading manufacturers of innovative smart card readers, has

developed a portable USB smart card reader. The OMNIKEY 6121 is a fully functional smart card reader for SIM-sized smart cards and is especially well-suited for use with mobile devices.

Applications for this reader include the download of GSM applications from the internet to the SIM card, W-LAN authentication, secure PC log-on, PKI for mobile users, digital signature, secure mobile banking and online transactions, loyalty programs, healthcare solutions and many more applications in the future.