Entries by IDVISIONME

HID UN MIFARE Computer Card

HID UN MIFARE Computer Card ( United Nations card ) Card Type 2, UN Global Access Card, Contactless Mifare Classic Integrated circuit (IC) in card, 1k bytes of memory in IC, Custom UN Mifare Programming in IC, Card Programming Marking is Matching, front of card is plain white with gloss finish, Back of the card is Gloss finish with Pre-printing Custom Art Work (custom art code=XXXX=BLANK, then no pre-pre printing), Photo Image able card, material of card is composite (60% PVC and 40% Polyester), No slot Punch, Shrink W rapped in 50s. For best offers on HID UN MIFARE Computer Card in Dubai, UAE, Middle East & Africa contact ID Vision on +971 4 2694 620 / sales@idvisionme.com

HID VertX V300 Output Control Interface

HID VertX V300 Output Control Interface

HID-VertX-V300-Output-Control-Interface

Overview :

The HID VertX® products provide a complete and fully featured hardware/firmware infrastructure for access control software host systems.

The V300 output control interface contains 12 latching Form-C relays, which can connect up to 12 devices controllable by simple contact closures, such as logic inputs for process equipment, HVAC and elevator control panels, CCTV switchers, etc. Loads exceeding 2 A @ 30 VDC should be controlled via interposing relays.

The V300 features on-board flash memory, allowing program updates to be downloaded via the network. The V300 connects to the V1000 through a high speed RS-485 network. The V1000 communicates with the system host via industry standard TCP/IP protocol over 10/100 Mbps Ethernet or the Internet. This architecture minimizes the impact on corporate LANs, by using only one TCP/IP address for every 32 Interfaces, and by handling low-level transactions on the RS-485 network.

Key Benefits

  • Off-normal status programmable for each input point (NO or NC alarm devices may be used).
  • 12 latching Form-C relays, contacts rated at 2A @ 30VDC.
  • Connects to the V1000 via RS-485.
  • Receives and processes real time commands from the V1000.
  • Reports all activity to the V1000.
  • Allows complex input/output linking when used with the V1000 and V200.
  • Attractive polycarbonate enclosure protects components from damage.
  • All connections and indicators are fully identified by silk-screened nomenclature on the cover.
  • UL 294 and UL 1076 recognized component.

HID VertX V200 Input Monitor Interface

HID VertX V200 Input Monitor Interface

HID-VertX-V200-Input-Monitor-Interface

Overview :

The HID VertX® products provide a complete and fully featured hardware/firmware infrastructure for access control software host systems.

The V200 input monitor interface connects up to 16 supervised input circuits. Each input point monitors and reports normal, off-normal, and alarm states. The V200 features on-board flash memory, allowing program updates to be downloaded through the network. The V200 connects to the V1000 via a high speed RS-485 network. The V1000, in turn, communicates with the system host via industry standard TCP/IP protocol, over 10/100 Mbps Ethernet, or the Internet. This architecture minimizes the impact on corporate LANs, by using only one TCP/IP address for every 32 interfaces, and by handling low-level transactions on the RS-485 network.

Key Benefits

  • Reports supervised or un-supervised alarm circuits.
  • Off-normal condition programmable for each input point (NO or NC alarm devices may be used).
  • Connects to the V1000 via RS-485.
  • Receives and processes real time commands from the V1000.
  • Reports all activity to the V1000.
  • Allows complex input/output linking when used with the V1000 and V300 Output Control Interface.
  • Attractive polycarbonate enclosure protects components from damage.
  • All connections and indicators are fully identified by silk-screened nomenclatureon the cover.
  • UL 294 and UL 1076 recognized components.

Specifications :

Dimensions: 5.8″ W x 4.825″ H x 1.275″ D (147.32 mm x 122.55 mm x 32.38 mm)

Weight: 12.4 oz (.35 kg)

Power Supply Requirements: 50 mA @ 9-18 VDCRecommended: Supervised linear power supply with battery back-up, input surge protection, and AC fail and battery low contact outputs. Separate supervised DC supply with battery back-up recommended for relay activated devices.

Cable Distance:

    • RS-485 – 4000 feet (1220 m) to host, using Belden 3105A,22AWG twisted pair, shielded 100? cable Input Circuits – 500 feet (150 m), two-conductor, shielded,using ALPHA 1292C (22AWG) or Alpha 2421C (18AWG).
  • Output Circuits – 500 feet (150 m), 2-conductor, using ALPHA. 1172C (22AWG) or Alpha 1897C (18AWG). Minimum wire gauge depends on cable length and current requirements.

Certifications:

    • UL 294 and UL 1076 Recognized Component for the US
    • CSA 205 for Canada
    • FCC Class A Verification
    • EMC for Canada, EU (CE Mark), Australia (C-Tick Mark),
      New Zealand, Japan
  • EN 50130-4 Access Control Systems Immunity for the EU (CE Mark)

HID V100 Door / Reader Interface

HID V100 Door / Reader Interface

HID-Vertx-V1000-evo-controller

Overview :

The HID VertX® products provide a complete and fully featured hardware/firmware infrastructure for access control software host systems.

The V100 Door / Reader Interface connects two access control card readers via Wiegand or Clock-and-Data interface controlling either one or two doors. The V100 features on-board flash memory, allowing program updates to be downloaded via the network. The V100 connects to the V1000 through a high speed RS-485 network. The V1000, in turn, communicates with the system host via industry standard TCP/IP protocol over 10/100 Mbps Ethernet or the Internet. This architecture minimizes the impact on corporate LANs by using only one TCP/IP address for every 32 interfaces and by handling low-level transactions on the RS-485 network.

Key Benefits :

  • Reports supervised inputs.
  • Connects to the V1000 via RS-485.
  • Receives and processes real time commands from the V1000.
  • Reports all activity to the V1000.
  • Attractive polycarbonate enclosure protects components from damage.
  • All connections and indicators are fully identified by silk-screened nomenclature on the cover.
  • Processes off-line access control decisions based on facility code.
  • UL 294 and UL 1076 recognized components.

Specifications :

Dimensions: 5.8″ W x 4.825″ H x 1.275″ D (147.32 mm x 122.55 mm x 32.38 mm)

Weight: 12.4 oz (.35 kg)

Power Supply Requirements: 60 mA @ 9-18 VDC (with no readers connected) Recommended: Supervised linear power supply with battery backup, input surge protection, and AC fail and battery low contact outputs. When VertX is supplying power to readers the requirements are 600 mA @ 9-18VDC. The V100 can supply 500 mA to two readers

Cable Distance:

  • RS-485 – 4000 feet (1220 m) to host, using Belden 3105A, 22AWG twisted pair, shielded 100? cable Wiegand – 500 feet (150 m) to reader – using ALPHA 1299C 22AWG, 9-conductor, stranded, overall shield (Fewer conductors needed if all control lines are not used).
  • Input Circuits – 500 feet (150 m), 2-conductor, shielded, using ALPHA 1292C (22AWG) or Alpha 2421C (18AWG)
  • Output Circuits – 500 feet (150 m), 2-conductor, usingALPHA 1172C (22AWG) or Alpha 1897C (18AWG) Minimum wire gauge depends on cable length and current requirements.

Certifications:

  • UL 294 and UL 1076 Recognized Component for the US
  • CSA 205 for Canada
  • FCC Class A Verification
  • EMC for Canada, EU (CE Mark), Australia (C-Tick Mark),
    • New Zealand, Japan
  • EN 50130-4 Access Control Systems Immunity for the EU (CE Mark)

HRVIEW Access Control | Time and Attendance Software

An Open Platform application for enterprise access control and attendance management, which integrates with best of the breed security platforms from global manufactures. The Uniqueness of HRView lies in its being pan-organization access control software and a universal time attendance management solution. It runs in geographically spread offices of transnational organizations synchronizing their processes. HRView is easily accessible through a web-based interface, this makes usability, monitoring and administration easy for all users of the software. Only a computer with a browser hooked to an Internet connection is required and business can go on as usual. With HRView all access management regulations & compliances can be automatically kept in sync effortlessly. It reduces the workload and enhances the efficiency by automating access management. Features : Privilege & Workflow management HRView mirrors all relevant business rules and workflows essential for issuance of access rights and credentials to various sets work force comprising of employees, contractors, vendors and visitors. Integration with Active Directory helps create an ‘Organizational Chart’ for a privilege based access to various forms and features of HRView portal and administrative rights over workforce groups and entities. Shift management Shift management is easy with HRView, it can be used to help create, monitor and manage any kinds of work shifts. Weekly shifts, night shifts, auto shifts and flexible shiftscan be administered and attendance in these shifts be tracked. With HRView’s enterprise-wide integration capabilities, attendance in these shifts can be linked to payroll processing systems and human resource management systems. Multilingual & application personalization The application offers multilingual support enabling transnational organizations to operate on a global platform while fulfilling the need for a localized user interface. The portal can be further personalized as per corporate identity. Dashboards & Widgets HRView allows you to prepare customizable & shareable dashboards with ‘website Embeddable widgets’. The dashboards can be shared across the organization amongst various stakeholders. The selected widgets can be embedded on websites. The dashboards can be customized based on department and designations. Multi-Tenant Configure multiple business entities coexisting in a facility having common and private areas such as Business Parks, Malls, SEZs. Complete confidentiality of information is maintained among Business entities. Attendance regularization Travelling employees can send in ‘on-duty requests’ through HRView’s web-based or mobile interface. Approvals and subsequent attendance regularization and synchronization with leave and payroll software modules are taken in completely by HRView. Compliance & reporting engine The HRView reporting engine facilitates security administrators, HR managers, Team Coordinators with unlimited flexibility to design & build reporting templates as per organizational audit & compliance needs. The engine includes multiple reporting categories; each category contains multiple predefined templates as per customary industrial norms. The templates can be modified in terms of field selection, ordering, naming, data formatting, data grouping & more. The reports can be sent over emails or can be set as downloadable with their generation cycle being suitably defined. Cloud Ready The application can be hosted or offered as a cloud service for better efficiency, reliability and scalability. The most significant benefit of managed service platform is in terms of IT cost savings; it is more reliable & consistent as compared to in-house IT infrastructure. For more information on HRview time attendance & Access control software contact ID VISION Dubai on +971 4 2694 620 / sales@idvisionme.com

Elyctis ID TAB – 9″ series

Features:  ID-dedicated tablet with all-in-one functionalities and additional modulesBenefits:  Fast reading of all types of ID documents without user action thanks to static MRZ and RFID readers. Better ergonomy than MRZ swipe-through solutionsMarkets: Mobile eID check eID authentication Airport check-in Queue boosting KYC (Banks & Telecoms) Car rental Hotel check-in Customers:  Public and private companies requiring mobile identity verification.

HID VertX Controllers

HID VertX Controllers

Traditional Networked Access or Intelligence at the Door

Networked Access Solutions from HID Global offer a versatile, open architecture, IP-enabled platform for deploying a wide range of access control systems. HID Global’s adaptable and easy-to-use networked access control solutions deliver intelligence to the door while protecting the value of clients’ overall investments, from controller to reader to credential, whether you need to operate two doors or manage hundreds of doors at several facilities. Select the application that best meets your requirements:

  • VertX® a traditional topology multi-door controller with downstream interface modules.
  • EDGE® a single-door PoE-enabled controller
HID-VertX-V300-Output-Control-Interface

HID-VertX-V200-Input-Monitor-Interface

HID-Vertx-V2000-evo-controller

HID-Vertx-V1000-evo-controller

HID-EDGE-EVO-EHRP40-K-Controller

HID’s versatile OEM panels and software solutions can work with practically any access control software system. You simply need to alter the software if you want to change things using this non-proprietary method. Both EDGE and VertX can quickly adapt to facility expansion or changes in card/reader configuration in this continually changing market. Contact our office based in Dubai to get the free quote.

EDGE EVO : Interface Module to a single-door access control
VertX EVO : Multi-door access control panels that reduce the burden on corporate LANs
VertX : IP-based access control of remote management and report generation
pivCLASS : Provides strong authentication for physical access and as part of a FIPS 201 compliant solution

VertX is a multidoor access control panel that uses only one IP address to link up to 32 door controllers, reducing the load on corporate LANs. All online door judgments, input monitoring, and output control for all linked interface modules are handled by the VertX. ID Vision is the master supplier of VertX Access Controllers in Dubai and all UAE. You will find only genuine HID access control products at our place with the best price and best after sales service in the entire Middle East and African continent.